The main factors that cause the industrial computer blue screen

When using an industrial computer, you may encounter a blue screen failure. There are many reasons for the blue screen of the industrial computer. Here is a brief analysis of the main factors and solutions of the blue screen of the industrial computer. I hope it can be helpful when encountering a blue screen failure of the industrial automation computer in the field.

1. Dust accumulation leads to blue screen of industrial computer

After a long-term operation of the industrial computer, dust may accumulate, which is a common cause of the blue screen of the industrial computer. Because the industrial computer works in a complex environment, the accumulation of dust will also cause poor heat dissipation. At the same time, if there is too much dust on the mechanical hard disk, it will affect the difficulty of reading the hard disk and cause the industrial computer to crash. Therefore, after the industrial computer has been running for a period of time, dust cleaning should be carried out. In addition, the original parts inside the industrial computer have been used for a long time, causing aging and also causing the blue screen of the industrial computer. The fan is the most prone to aging. It can be lubricated regularly, or the fan can be replaced to solve such problems.

2. The memory problem causes the blue screen of the industrial computer

After running for a period of time, the industrial computer crashes inexplicably, and there is no problem after restarting. This is actually a conflict of memory resources. If the memory is too small, the loading program will slow down, and it will also cause the blue screen of the industrial computer. The best way is to try not to let multiple programs run at the same time, just install some commonly used software. At the same time, the looseness or dampness of the memory stick will also cause the blue screen of the industrial computer. Replace the memory stick, everything is normal after the replacement is the memory stick problem.

3. Insufficient hard disk or power supply leads to blue screen of industrial computer

Now the capacity of the hard disk is very large, and it is rare that the remaining space of the hard disk is insufficient and the blue screen of the industrial computer is caused. However, the hard disk still needs to be regularly cleaned up for some debris and simple maintenance work. Scan the hard disk with disk scan software from time to time. If there are some logical errors on the hard disk, the software can be used to solve it. The power supply is very important. If you can't find the reason after excluding everything else, you can try to replace the power supply. Because there are a large number of boards inside the industrial computer, the power consumption is very large. If there is no good power supply, the lack of power supply will easily cause the blue screen of death of the industrial computer.

Regarding the blue screen of the industrial computer workstation, it is necessary to find more problems in the daily maintenance of the industrial computer, and use experience to determine the solution. There is no big problem, and most of them can be solved by using alternative judgments.